Outboard Boats by Rogue Jet
The Ultimate in Custom Welded Aluminum Outboard Boats
Rogue Jet Coastal Outboard Series with 4 Stroke
Outboard Power

"The Coastal Outboard Series is designed to handle the rough
stuff"
Built extra deep and wide with extra
freeboard to handle the roughest waters, these outboard
powered Deep Vees from Rogue Jet are the safest, most
seaworthy aluminum boats you can buy! Available in 20’ to
26’ lengths, these boats are loaded with standard fishing
features. Come take a look and let us build one for you.

Standard
Features for Rogue Jet Boatworks “Coastal Outboard” Boats
Top gun canvas ½
top, side curtains, and storage boot, zolatone interior paint with clear coat,
1/3 outside paint, carpeted interior sides, marine vinyl floor, horn, Navigation
lights, Dual batteries with switch, 1100 gal. bilge pump with auto switch, 2
water separating fuel filters, 12 volt power point, complete gauge package
including hour meter, locking glove box with grab handle, 5 welded cleats,
welded gunnel and bow railing, diamond plate step deck, bow storage compartment,
rope locker, welded transducer bracket, two river master captain chairs on
pedestals with for/aft slider for starboard chair, 2 storage box seats with
cushions and folding backs, full width extended outboard bracket, extra large
transom fish box, extra large under floor
fish box, outside drains for fish boxes, starboard panoramic windshield wiper,
welded downrigger brackets, zinc anode at transom, walk thru windshield step
storage compartment, full length side trays, rod gripper above side trays,
under floor fuel tank, transom storage area,
stainless steel steering wheel,
self draining bow,
four 8” welded tie down cleats,
carpet on both dashes, diamond plate doors on both
fish boxes
Optional Features for Coastal Outboard Series
Wash down pump
system, down riggers, Sonar/GPS, radar, spotlights, flood light, courtesy
lights, reflex flooring, port windshield wiper,
½ to full hard
tops, drop curtain for top, Alaskan bulkhead,
crab davit,
auxiliary kicker engine, hydraulic
steering, suspension seats,
swivels for suspension seats,
sport fish seating package,
extra boat length, port under helm storage
compartment, custom paint
The Rogue Jet
“Coastal Outboard” series boats have been designed for
the open water of rivers, lakes, bays and the
ocean.
We designed the “Coastal
Outboard Series” to safely
navigate the rough seas. Safety in high sides (36”)
and the extra wide bottom (78”) for stability makes
the “Coastal” one of the safest and most
seaworthy all welded aluminum boats in the
industry

The progressive
dead rise of the boats bottom (from 18 degrees at
the transom to 50 degrees at the bow)
makes for a smooth ride in choppy seas.
| Lenghth |
20 to 26 feet |
| Beam |
102 inches |
| Side Height |
36 inches |
| Floor Width |
79 inches |
| Bottom Dead Rise |
18 degrees transom / 50 degrees bow |
| Hull |
Progressive dead rise |
| Reverse Chines / Strakes |
4 |
| Keel |
Reinforced .250 inch keel extrusion |
| Side Thickness |
.125 inch |
| Bottom Thickness |
.190 inch for 20' / 21', .250 inch for 22' thru 26' |
| Longitudinal Box Girder Thickness |
.160 inch |
| Gunnels Thickness |
.125 inch |
| Transom and Extend Outboard Bracket Thickness |
.190 inch for 20' / 21', .250 inch for 22' thru 26' |
| Fuel Tank Capacity |
50 to 110 gallons |
Available 6 models
of the “Coastal Outboard Series": Open boat with center console,
Forward windshield, ½
hard top, ¾
hardtop, and full hard top with slant back or slant forward windshield





"The Ultimate Aluminum Jet Boat Experience", let Rogue
Jet Aluminum Boats build you the best welded aluminum jet boats in the world!
Bruce Wassom
(541) 944-2155
President and CEO,
Rogue Jet Boat Works
2845 Merry Lane, White City, OR 97503
E-Mail: Rogue Jet Boat
Works
Search Engine Optimization by Upwardrankings.com
|